Tapered Coffee Table

$45.00

9 Part Video Series showing you how to make your own tapered coffee table. Includes step by step instructions and measured drawings.

Category:

Description

The perfect accessory for any living room, this tapered coffee table is a great project for an intermediate furniture maker. A large chamfered edge gives this table a sleek appearance and it is held up with modern, turned and tapered legs. This project includes 9 video lectures, measured drawings, step by step instructions, a material list, cut list and a tool list.

  • Section 1 – Introduction
    • Lesson 1.1 – Introduction
    • Lesson 1.2 – Plans
    • Lesson 1.3 – Material List
    • Lesson 1.4 – Cut List
    • Lesson 1.5 – Tool List
  • Section 2 – Lumber
    • Lesson 2.1 – Acquire Lumber
    • Lesson 2.2 – Mark Out Parts
    • Lesson 2.3 – Rough Out Parts
  • Section 3 – Milling
    • Lesson 3.1 – The Faces
    • Lesson 3.2 – The Edges
    • Lesson 3.3 – Rip and Crosscut
  • Section 4 – Gluing Up the Top
    • Lesson 4.1 – Introduction
    • Lesson 4.2 – Glue up
    • Lesson 4.3 – Clean Up the Glue Lines
    • Lesson 4.4 – Crosscutting
  • Section 5 – Mortises
    • Lesson 5.1 – Introduction
    • Lesson 5.2 – The Set Up
    • Lesson 5.3 – Drilling the Mortises
  • Section 6 – Angled Shoulders
    • Lesson 6.1 – Layout
    • Lesson 6.2 – Cut #1
    • Lesson 6.3 – Cut #2
    • Lesson 6.4 – Cut #3
    • Lesson 6.5 – Cut #4
  • Section 7 – Turning the Tenons and Legs
    • Lesson 7.1 – A Note on Turning
    • Lesson 7.2 – Reference Marks
    • Lesson 7.3 – Turning
    • Lesson 7.4 – Cutting the Legs to Length
  • Section 8 – Chamfering the Top
    • Lesson 8.1 – The Jig
    • Lesson 8.2 – Set up the Saw
    • Lesson 8.3 – Cut the Chamfers
    • Lesson 8.4 – Clean up the Bottom
  • Section 9 – Finishing Touches and Glue-up
    • Lesson 9.1 – Dry Fitting
    • Lesson 9.2 – Final Assembly
    • Lesson 9.3 – Finishing Touches